close
Menu
F441R Fixed Chamber Balers

F441RFixed Chamber Balers

  • Built for high volume use
  • Premium specification
  • Excellent in all kinds of crop
null

The rugged and reliable design of the F441R is for high volume silage baling operations where speed and capacity are essential. Its premium specification includes stainless steel pick-up strippers and heavy duty rolls for added durability in heavy, wet crops. And the reinforced gearbox and driveshaft means you can push it to the absolute limit without any worries.

Specifications

John Deere

F441R

Fixed Chamber Balers

Key Specs

Density controlFrom baler (BaleTrak monitor) or from display (ISOBUS)
Regular pickup - Bars5 tines bars
SizeDiameter
1.25 to 1.35 m
4.1 to 4.43 ft
Width
1.21 m
3.97 ft

Baler

LengthGate closed
3.90 to 4.80 m
12.8 to 15.7 ft
3.90 to 4.80 m
12.8 to 15.7 ft

Bale forming

Forming chamber17 or 18 ribbed rolls with two reinforced and two heavy duty
Density controlFrom baler (BaleTrak monitor) or from display (ISOBUS)

Regular pickup

Width
2 m
6.56 ft
Bars5 tines bars
Gauge wheelsStandard - fixed gauge wheels or castor-action gauge wheels
Strippers materialStainless steel
Windrow compressor systemCompressor shield (2.0 m [6.56 ft] only) or compressor roll

Non-cutting rotor

RotorNot available

Wide pickup

Width
2.2 m
7.22 ft
Bars5 tines bars
Gauge wheelsStandard - fixed gauge wheels or castor-action gauge wheels
Strippers materialStainless steel
Windrow compressor systemCompressor shield (2.0 m [6.56 ft] only) or compressor roll

Standard precutter

RotorHigh Capacity (HC) in line concept - Hardox
Knives13 - managed from the baler - individually spring loaded
Knife spacingFrom 80 mm
3.15 in.
Unplugging systemWide drop floor with parallel kinematic managed from the monitor

Fine chop precutter

RotorHigh Capacity (HC) in line concept - Hardox
Knives25 - managed from the baler (12/13/25) - individually spring
Knife spacingFrom 40 mm
1.57 in.
Unplugging systemWide drop floor with parallel kinematic managed from the monitor

Binding system

TypeStandard
2 net rolls
Optional
1 optional
Net wrap

Tire size

Optional15/70-18
16/70-20
500/55-20
520/55R22.5
600/50-22.5

Driveline

Drive protectionCam-type cut out clutch
PTO speed540 rpm (MaxiCut HC 13 only) or 1000 rpm (MaxiCut HC 13 or MaxiCut HC25)

Additional information

Maintenance/chainsAutomatic chains lubrication system as standard
Date collected16 May 2017
F441R undefined Ynys Môn, Denbighshire, Gwynedd undefined MONATRACTOR