Whether you’re aerating fairways or sports fields, nothing beats the Aercore 1000, 1500 and 2000 for hole quality and productivity. These tractor-mounted units core a mighty swath. The 1000 can aerate from 20,000 to 50,000 sq. ft./hr. at a coring swath of 37.5 inches. The 1500 can do 30,000 to 75,000 sq. ft./hr. at a coring swath of 57.5 inches. And the 2000 aerates from 40,000 to 100,000 sq. ft./hr. at a coring swath of 77.5 inches.
Productivity for aeration equipment is measured in two ways:
The Aercore™ models excel in both areas. All of these aerators can pull as many as 322.8 cores per m2 (30 cores per sq ft). The number of holes per square foot is a variable number based on the ground speed of the tractor. Most competitors try to quote high numbers of square feet per hour.
The Aercore™ 2000, 1500, and 1000 use the same belt-driven design, which provides a quiet, smooth operation that does not require lubrication. A matched pair of fiberglass-reinforced belts provides long life and requires minimal adjustments.
Even the occasional belt replacement is made easy by having all the belt drive components located on top of the machine, where they are easily accessible. All the drive components are easily located for daily checks and routine maintenance. The entire drive assembly utilizes sealed bearings, so there is no need for daily lubrication.
Four sizes of tine holders are available for the Aercore™ aerators; the choice is determined by the turf's needs:
4X tine holders are suited for those who want larger tines that have the closest-possible side-to-side hole spacing. The 4X tine holders have a hole spacing of 61 mm (2.4 in.). There are two 4X tine holders—one for tines with a 22.2-mm (7/8-in.) mounting diameter and one for tines with a 19-mm (3/4-in.) mounting diameter.
3X tine holders are also for larger tines, but at a wider spacing. The 3X tine holders have a spacing of 81.3 mm (3.2 in.). There are also two 3X tine holders—one for tines with a 22.2-mm (7/8-in.) mounting diameter and one for tines with a 19-mm (3/4-in.) mounting diameter.
Mini tine holders are for those who want to poke a lot of small holes. Mini tine holders provide a hole spacing of 34.5-mm (1-3/8 in.). The mini tine holder is compatible with tines that have a 9.65-mm (3/8-in.) mounting diameter.
Needle tine holders are for making the smallest-possible hole when aerating greens. Disruptions of play can be minimized by not having to pick up cores after aeration. Needle tine holders provide a hole spacing of 34.5 mm (1-3/8 in.). The needle tine holder is compatible with both the 5-mm (0.2-in.) and 8-mm (0.31-in.) tines.
Serviceability is a key issue on aeration equipment, and the Aercore 1000, 1500, and 2000 have the best service access in the industry. As the photo illustrates, with the cover lifted up, the drive assembly is readily accessed.
The entire tine ram assembly can be removed in a matter of minutes by removing a single cap screw on the top end and four bolts on the rear frame. Tines can easily be changed from the rear of the machine in minutes, as well.
Access to the tine holders is also achieved from the rear of the machine, making it very convenient to alter the hole spacing with a different set of tine holders. Belt changes can be easily accomplished because they are readily accessible.
The park stand design allows quick and easy removal of the park stands for aerification and easy attachment for storage. No tools are needed to remove and attach the improved park stands.
These park stands are standard equipment according to the follow serial number ranges and are retrofittable to prior machines:
The Aercore™ 1000, 1500, and 2000 have a large, 15.2-cm (6-in.) diameter roller, which provides better ground clearance and reduces the potential for turf scuffing in undulating areas.
|Machine width||37.5 in|
|Productivity||2.4 x 2.0 in|
20,013 sq ft/hr
|Tine Sizes||1 in|
|Dimensions Weight, lb||865 lb|
Product features are based on published information at the time of publication. Product features are subject to change without notice. Contact for more information.